Unlike traditional microcements, AQUALLUXE® is waterproof throughout the entire system — not just on the surface.

Engineered with compressive strength up to 60MPa, ideal for submerged environments.

Flexural strength of 40MPa allows it to handle minor substrate movement, perfect for Australian climate shifts.

Safe underfoot and resistant to chlorine, pool chemicals, and UV exposure.

Seamless finish with no joins or grout lines — no mould, no leaks, and easy to clean.

Paste-based formula means no airborne silica dust, making application safer and cleaner.

From backyard pools to resort spas, AQUALLUXE® is built to handle the challenges of the Australian climate — from temperature extremes to constant exposure to water and chemicals. Its seamless surface resists cracking, fading, and deterioration, while maintaining its elegant look for years to come.

Whether you’re a builder, designer, or homeowner, AQUALLUXE® delivers a premium, easy-to-apply solution that outperforms traditional coatings — both technically and aesthetically.

AQUALLUXE® is applied in three smooth coats at 1mm each, followed by a specialised sealer for added strength and chemical resistance. The system bonds to concrete, shotcrete, pebblecrete, and tiles, making it ideal for both new builds and renovations.

ProDécor® is committed to delivering advanced surface technologies that combine beauty with longevity. AQUALLUXE® embodies this vision — offering superior durability, safety, and elegance in one complete solution.

Made from natural clay, limestone & marble. VOC-free, breathable, and low carbon impact.

Achieves a rich, mineral cloudy look with a smooth and continuous surface.

Built-in flexibility prevents cracking caused by minor substrate movement.

High alkalinity and vapour-permeable, helping prevent moisture build-up and mould growth.

High surface hardness and excellent adhesion for long-lasting beauty.

Healthier for homes, studios, commercial and wellness spaces.

Inspired by Mediterranean tradition and engineered for modern performance, MICROCLAY is ideal for Australia’s climate and lifestyle. It delivers breathable, low-maintenance surfaces that are both functional and artistic — perfect for residential, hospitality, or commercial spaces that demand calm, character, and quality.

1. PrimeApply
MICROCLAY Primer evenly with brush or roller. Let dry for 1 hour.

2. Plaster
Apply two thin coats of MICROCLAY using a trowel in varied directions. Allow at least 3 hours between coats.

3. Seal
Seal the surface with MICROCLAY Sealer after 24–48 hours for enhanced protection and longevity.

MICROCLAY connects traditional Mediterranean artistry with contemporary design. Each surface holds subtle variations in tone and texture, evoking handmade depth with a modern sensibility. It’s the perfect choice for those who value aesthetic integrity, sustainability, and simplicity in one elegant finish.